Independent Stage 11 Forged Hollow Tony Hawk Transmission Silver/Green Skateboard Trucks (sold as a pair)
*NOTE the 159, 169 only have 4 hole pattern baseplates!Independent Forged Hollow Tony Hawk Transmission trucks featuring artwork by Mark Mothersbaugh @ markmothersbaugh. Polished silver hanger with glow-in-the-dark pad printed graphic on front and laser etched signature on the back, anodized neon green baseplate, black cushions, and silver hardware.
Super lightweight, mid-profile truck with forged baseplate and hollow axle & kingpin.
10% lighter than Stage XI
53.5mm tall for optimal performance and wheel clearance with 54mm and under wheels.
A356 T6 Aluminum Hanger
The best lightweight aluminum alloy heat treated to T6 condition for strength, durability, and grind feel.
Forged 6061 Aluminum Baseplate
Aircraft-grade forged aluminum allows a thinner part while still maintaining high density and strength.
Hollow Chromoly Axle & Kingpin
Highest quality hollow Chromoly steel for durability and weight saving.
Independent Trucks are Built to Grind and Guaranteed for Life.
What Size Trucks Do I Need For My Board?
Need some help deciding what trucks to put on your board? We’re here to help! You will notice that there are some areas of overlap on the deck width side of things. There are areas where more than one size of truck will fit. It really comes down to personal preference, and can also depend on what size wheels you ride. Don’t stress too much about it though. Use this chart as a guideline, and you’ll be shredding in no time!
|6.20 - 7.60||109 / 6.90 axle||-||110 / 6.90 axle or 120 / 7.20 axle|
|7.40 - 7.80||129 / 7.60 axle||7.6||130 / 7.60 axle|
|7.80 - 8.20||139 / 8.00 axle||8||140 / 8.00 axle|
|8.10 - 8.50||144 / 8.25 axle||8.25||140 / 8.00 axle or 150 / 8.50 axle|
|8.25 - 8.65||149 / 8.50 axle||8.5||150 / 8.50 axle|
|8.60 - 9.00||159 / 8.75 axle||8.5||150 / 8.50 axle|
|8.90 - 9.50||169 / 9.125 axle||9.0||-|
|9.50 - 10.50||215 / 10.00 axle||-||-|
*Deck range recommendation varies depending on type and width of wheels
Do I Need Riser Pads?
When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid ‘wheel bite’. Don’t know what ‘wheel bite’ is? Well, consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will ‘bite’ and stop rolling. This often means that you go flying off your board. So if you’re running bigger wheels make sure to read through this chart. While it might look like homework it’s definitely more fun than hitting the pavement!
|Truck Height**||Wheel Range***|
|48.5 - 52||49 - 53|
|52 - 53.5||51 - 55|
|53.5 - 55||53 - 57|
|60||55 - 59|
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.
What Size Hardware Do I Need For My Board?
|Wheel Size||Riser Size||Hardware Size|
|7 ply deck||9 ply deck|
|49 - 55||-||7/8"||-|
|55 - 58||1/8"||1"||-|
|57 - 60||1/8" - 3/8"||1 1/4"||1 1/4"|
|60 - 65||3/8" - 1/2"||1 1/2"||1 1/2"|