Tracker DART SIXTRAC Raw 161mm Skateboard Trucks
- 161MM - 9.00 AXLE
- Sold as a pair
The Tracker Dart takes its design and turn angle from the Trackers of the late 1970’s. The Dart is a medium height truck, which allows for more wheel clearance reducing wheel bite. The truck has a sort of surf feel, very stable at high rates of speed and predictable in action. One thing is certain; the dart has a truck size to fit your application guaranteed!
Tracker uses 356 T6 aircraft grade aluminum, 4140 Chromoly steel axles and grade 8 kingpins in all of our trucks. Every part of this truck was proudly hand built / inspected in the U.S.A and comes with a lifetime guarantee.
Sold in pairs (2 trucks).
Do I Need Riser Pads?
When running certain combinations of trucks and wheels sometimes it becomes necessary to use riser pads to avoid ‘wheel bite’. Don’t know what ‘wheel bite’ is? Well consider yourself lucky. Wheel bite is what happens when you turn your board and your wheel touches the deck. If you do this hard enough the wheel will ‘bite’ and stop rolling. This often means that you go flying off your board. So if you’re running bigger wheels make sure to read through this chart. While it might look like homework it’s definitely more fun than hitting the pavement!
| Truck Height** | Wheel Range*** |
|---|---|
| 48.5 - 52 | 49 - 53 |
| 52 - 53.5 | 51 - 55 |
| 53.5 - 55 | 53 - 57 |
| 60 | 55 - 59 |
**You can find truck height information in the 'Details' area a specific truck page.
***Wheel size recommendation with no riser.
What Size Hardware Do I Need For My Board?
When attaching your trucks to your board you’re gonna want to make sure your bolts are long enough. If you use risers, you’ll want to run a longer bolt, but you don’t want to go too long or your setup will look all goofy! Use the chart below and everything will fall into place.
| Wheel Size | Riser Size | Hardware Size | |
|---|---|---|---|
| 7 ply deck | 9 ply deck | ||
| 49 - 55 | - | 7/8" | - |
| 55 - 58 | 1/8" | 1" | - |
| 57 - 60 | 1/8" - 3/8" | 1 1/4" | 1 1/4" |
| 60 - 65 | 3/8" - 1/2" | 1 1/2" | 1 1/2" |
